查看完整版本: pccw + tp link router

淚..*╮ 2010-11-16 01:23 PM

pccw + tp link router

事源係咁既..
我fd早排買左個router +佢係用pccw上網既..
咁我上去幫佢整啦~但係d線整好晒之後呢..
到到set router果part搞唔掂...
我將1條線係連住modem to router既wan位~
發覺上唔到網
但係將線連係lan位就得..
我先前爬文有ching話router做左switch..
但其實呢個case究竟要點搞?
係唔係唔關個router事...係個modem問題?
有冇ching識set pccw個modem?

thanks a lot!!!

淚..*╮ 2010-11-16 01:24 PM

btw,我好小心~次次個login name同pw都係冇錯~

TaiWings 2010-11-16 02:52 PM

回覆 1# 的帖子

PCCW --> modem <--> router <--> devices
- the modem is connected to the WAN port of router
- the devices e.g., PC, XBOX,... etc is connected to the LAN ports of router.

I believe PCCW provided you a 2-in-1 (i.e., modem + router).
Run the 2-in-1 in bridge/modem mode i.e., use it as a modem only.  Call PCCW support.  They should be able to help you with the detail procedure.

Specify the PCCW UserName and Password in the WAN setup of router.  Refer to the manual of router.

淚..*╮ 2010-11-17 04:48 PM

我d線係冇駁錯
有冇ching試過係咁?
請share solution!!!

rol801 2010-11-17 05:47 PM

[quote]原帖由 [i]淚..*╮[/i] 於 17/11/2010 16:48 發表 [url=http://computer.discuss.com.hk/redirect.php?goto=findpost&pid=271748922&ptid=13433610][img]http://computer.discuss.com.hk/images/common/back.gif[/img][/url]
我d線係冇駁錯
有冇ching試過係咁?
請share solution!!! [/quote]

Suggestion講左但係你又要Challenge 又話自己冇錯。 咁你想點呢 ?

"連住modem to router既wan位 - 發覺上唔到網  ,但係將線連係lan位就得"  .  用咩Modem你唔講。 阿叉知係咪reset BRM modem 做 modem mode ?

呢家係邊個問邊個答。 你諗清晰先.  有幾多個原因同solution心裡有數。 你咁問法 要唔要點答你係另一回事

sinson123 2010-11-17 08:24 PM

你有無係router度set番WAN係用PPPoe,然後輸入番user 同password??無既當然上唔到啦-.-
插去LAN度當然無事,因為router LAN port係switch黎,當然可以同modem contact~

唔該睇下說明書,除非個router係執番黎=.=

淚..*╮ 2010-11-18 01:05 PM

回覆 5# 的帖子

我只不過係回應返#3既帖..話我d線係冇駁錯姐..
咁都叫challenge?

其實#3 ching講既野我都差唔多做晒
差在我係幫個fd整..打去pccw要登記人個id
咁岩佢丫爸唔係度..
所以我先上黎問solution

另外,我都有爬文,大概知道係pccw個modem有問題..
但係我又唔係同開佢個modem..我都唔知係邊個..

淚..*╮ 2010-11-18 01:10 PM

回覆 6# 的帖子

我已經set過好多次...
reset個router再set login name+pw都試過
說明書係有教你初頭點set
但係再深入d就冇

TaiWings 2010-11-18 01:55 PM

1). Make sure your wiring is as below.
PCCW --> modem <--> router <--> devices
- the modem is connected to the WAN port of router
- the devices e.g., PC, XBOX,... etc is connected to the LAN ports of router.

2). Call PCCW to confirm if the modem is a 2-in-1 i.e., modem + router.  If it is a 2-in-1 then ask them to provide the detail procedure or help you to config it as a modem only i.e., run it in bridge/modem mode.

3). What is the brand and model of the router?  

4). Ensure the router has the latest firmware installed.  Update if needed.

Will help you with the rest after you've done the above.
頁: [1]
查看完整版本: pccw + tp link router