查看完整版本: 手寫板

sherry0052 2012-12-23 08:20 PM

手寫板

最近買千彩水晶手寫板。但在Windows 7(英文版)使用時,簡體字和繁體字卻變成怪字。
請問有什麼方法解決?

ady.keung 2012-12-26 06:02 PM

我都岩岩買左,我系winXP(中文版)就咁寫就冇問題,但就冇聯想字出,有時有就出亂碼,之前用現代好好用,明之買番現代啦

sherry0052 2012-12-27 12:31 PM

回覆 2# 的帖子

邊度有得買現代手寫板?:smile_41:

ady.keung 2012-12-27 03:41 PM

[quote]原帖由 [i]sherry0052[/i] 於 2012-12-27 12:31 PM 發表 [url=http://www.discuss.com.hk/redirect.php?goto=findpost&pid=350432521&ptid=21290414][img]http://www.discuss.com.hk/images/common/back.gif[/img][/url]
邊度有得買現代手寫板?:smile_41: [/quote]好多地方都有得買,行多幾間。
另外簡字,繁字出亂碼,你系安裝時是簡中文?你win英文版要安裝英語
[font=PMingLiU][size=12pt]你睇下說明有講
安裝畫面提示用戶選擇安裝軟體的語言種類。本軟體能根據用戶使用的[/size][/font][font=PMingLiU][size=12pt]Windows[/size][/font][font=PMingLiU][size=12pt]系統自動選擇語言(中文[/size][/font][font=PMingLiU][size=12pt]([/size][/font][font=PMingLiU][size=12pt]簡體[/size][/font][font=PMingLiU][size=12pt])[/size][/font][font=PMingLiU][size=12pt]、中文[/size][/font][font=PMingLiU][size=12pt]([/size][/font][font=PMingLiU][size=12pt]繁體[/size][/font][font=PMingLiU][size=12pt])[/size][/font][font=PMingLiU][size=12pt]、英語)。當前畫面表示用戶使用的是簡體中文系統,提示安裝簡體版手寫識別軟體。(如圖[/size][/font][font=PMingLiU][size=12pt]2[/size][/font][font=PMingLiU][size=12pt])當然也可以選擇安裝其他版本的手寫識別軟體,不過這會導致安裝出現亂碼,手寫識別軟體不能正常使用。[/size][/font]

[[i] 本帖最後由 ady.keung 於 2012-12-27 03:43 PM 編輯 [/i]]

sherry0052 2012-12-27 03:53 PM

回覆 4# 的帖子

在Windows 7(英文版)安裝時,我已選左英文。
雖成功安裝,但到寫字時出現亂碼。

另外,現代手寫板大約幾錢?

[[i] 本帖最後由 sherry0052 於 2012-12-27 03:57 PM 編輯 [/i]]

ady.keung 2012-12-27 07:00 PM

糸香港仔幾間見過$5x-8x不等

sherry0052 2012-12-28 12:34 AM

回覆 6# 的帖子

可惜香港仔太遠了。

謝謝!我會去電腦店格價。

win_lo 2012-12-30 01:54 PM

回覆 7# 的帖子

還隻中串手指好用,唔怕認唔到字,繁簡都得
300 到,我都用緊,可以隨身:loveliness:

sherry0052 2012-12-30 03:12 PM

回覆 8# 的帖子

係未要用mouse寫字?
我覺得用mouse好難寫字。

mac仔 2012-12-30 04:43 PM

路過

手寫板當然是蒙恬最好,係就係貴d,不過一分錢一分貨:loveliness:

sherry0052 2012-12-30 06:46 PM

回覆 10# 的帖子

謝謝!我再留意一下。
唔會再貪平買強國出既手寫板。
費事又出現怪字而用唔到。:smile_39:

ady.keung 2012-12-31 12:36 AM

[quote]原帖由 [i]sherry0052[/i] 於 2012-12-30 06:46 PM 發表 [url=http://www.discuss.com.hk/redirect.php?goto=findpost&pid=350674493&ptid=21290414][img]http://www.discuss.com.hk/images/common/back.gif[/img][/url]
謝謝!我再留意一下。
唔會再貪平買強國出既手寫板。
費事又出現怪字而用唔到。:smile_39: [/quote]其實可否返去換,我聽曰去試下可否換返現代

sherry0052 2012-12-31 12:40 AM

回覆 12# 的帖子

但個盒拆爛左兼丟左,驚佢唔換畀我。:funk:

tedbef 2012-12-31 05:58 PM

回覆 1# 的帖子

As in any non-unicode program, you need to set the correct language code for the program:
control panel> Region & language > Administrative > Change system locale, to either Chinese ( Traditional HK) or Chinese (Simplified PRC).
Also need to choose the same language code(Traditional or Simplified) at the end of QianCai installation (not the installation language at the beginning; uninstall and re-install to make sure).  Choose simplified if you want handwriting recognition of both.
I have used Qiancai installer V8.5 and pad model TP808 (HK$30) on windows 7 w/o problem.

[[i] 本帖最後由 tedbef 於 2012-12-31 06:03 PM 編輯 [/i]]

sherry0052 2012-12-31 08:33 PM

回覆 14# 的帖子

我試過了,不論正體或簡體,還是英文,也出現怪字。:smile_42:

tedbef 2012-12-31 09:19 PM

回覆 15# 的帖子

1.
[img]http://i1225.photobucket.com/albums/ee386/happyuser3/simplified_zps29ff8722.png[/img]
2.
[img]http://i1225.photobucket.com/albums/ee386/happyuser3/simplified2_zpsfc0688d0.png[/img]
3.
[img]http://i1225.photobucket.com/albums/ee386/happyuser3/simplified3_zpsecb87654.png[/img]

sherry0052 2012-12-31 09:24 PM

回覆 16# 的帖子

若成功設定,是否也可寫繁體字?

tedbef 2012-12-31 09:31 PM

回覆 17# 的帖子

Yes. see picture 3 above.
If U only write traditional, choose Chinese HK locale and answer "No" at the end of installation. (need to uninstall and re-install if you change)

sherry0052 2012-12-31 09:43 PM

回覆 18# 的帖子

好,謝謝指教!
我再試試。

ady.keung 2012-12-31 11:58 PM

[quote]原帖由 [i]tedbef[/i] 於 2012-12-31 09:31 PM 發表 [url=http://www.discuss.com.hk/redirect.php?goto=findpost&pid=350760145&ptid=21290414][img]http://www.discuss.com.hk/images/common/back.gif[/img][/url]
Yes. see picture 3 above.
If U only write traditional, choose Chinese HK locale and answer "No" at the end of installation. (need to uninstall and re-install if you change) [/quote]我都用千彩,裝完後寫糸正常,但就一糸冇聯想出,如有就出怪字,請教應點樣裝呢,我系用win xp(中文)thx

tedbef 2013-1-1 12:33 AM

回覆 20# 的帖子

Probably the program is optimized for simplified Chinese system but you are using traditional Chinese XP. Try the followings:
1. Make sure you have installed the Simplified version of Qiancai (#16 picture 2);
2. In control panel:

:[img]http://files.myopera.com/zhouye.ah/blog/Set%20the%20Language%20for%20non-Unicode%20programs%20to%20Chinese%20in%20the%20Advanced%20tab.png[/img]

3. change the Qiancai system setting (in the tool icon) to recognize traditional Chinese only.

ady.keung 2013-1-1 01:41 AM

唔該哂,轉左後有聯想字出,但糸是簡體字,彩晶是否只支援win簡體版,所以中,英版都會出怪字,否我轉左簡體會否影響我其它繁體軟件,thx

tedbef 2013-1-1 01:30 PM

回覆 22# 的帖子

1.聯想是簡體字
tried 3. in 21#, as below?
[img]http://i1225.photobucket.com/albums/ee386/happyuser3/simplified5.png[/img]

2. 彩晶是否只支援win簡體版,所以中,英版都會出怪字
I have no problem using Traditional, Simplified or English version on my English Win 7.  I don't have a Trad. Chin. XP system to try, but I believe they should work as long as you set a matching language locale in the control panel.  In the simplified version, you have the option to select recognition core (as in the above picture) but in the trad. version you don't have that flexibility, the only difference I find.

3. 轉左簡體會否影響我其它繁體軟件
Yes if your Trad. Chin. programs use non-unicode (e.g. Big5).  If you really have this conflict, the alternative is to install AppLocale ([url=http://www.microsoft.com/zh-tw/download/details.aspx?id=2043]http://www.microsoft.com/zh-tw/download/details.aspx?id=2043[/url]) and start Qiancai thru' it (you should first undo what you did in the control panel).

ady.keung 2013-1-2 01:30 AM

回覆 23# 的帖子

明白,唔該哂,其它繁體軟件暫未有影響,伹我記事簿入面D字就變左亂碼,糸咪裝你介紹o個個就得[img]http://i1278.photobucket.com/albums/y506/adykeung/123456_zps6c28bb63.jpg[/img]

[[i] 本帖最後由 ady.keung 於 2013-1-2 03:15 AM 編輯 [/i]]

sherry0052 2013-1-7 11:03 AM

[quote]原帖由 [i]tedbef[/i] 於 2012-12-31 21:31 發表 [url=http://computer.discuss.com.hk/redirect.php?goto=findpost&pid=350760145&ptid=21290414][img]http://computer.discuss.com.hk/images/common/back.gif[/img][/url]
Yes. see picture 3 above.
If U only write traditional, choose Chinese HK locale and answer "No" at the end of installation. (need to uninstall and re-install if you change) [/quote]


當轉返language 去英文又無左寫的功能,整到部電腦load 得好慢,整到部機個畫面歪左,整左好耐先整番,又要turn off firewall 又要轉language,download 後轉返又唔work。請問有辦法解決嗎?

[[i] 本帖最後由 sherry0052 於 2013-1-7 10:28 PM 編輯 [/i]]

sherry0052 2013-1-10 11:35 AM

請問有冇高手可以幫幫忙?:smile_41:

ady.keung 2013-1-12 06:59 PM

[quote]原帖由 [i]sherry0052[/i] 於 2013-1-7 11:03 AM 發表 [url=http://www.discuss.com.hk/redirect.php?goto=findpost&pid=351224484&ptid=21290414][img]http://www.discuss.com.hk/images/common/back.gif[/img][/url]



當轉返language 去英文又無左寫的功能,整到部電腦load 得好慢,整到部機個畫面歪左,整左好耐先整番,又要turn off firewall 又要轉language,download 後轉返又唔work。請問有辦法解決嗎? [/quote]你糸轉左簡體後就唔冼轉番去英文,一轉就用唔到,我都系咁。

sherry0052 2013-1-12 07:08 PM

回覆 27# 的帖子

但唔轉番英文的話,點打英文?:smile_41:

[[i] 本帖最後由 sherry0052 於 2013-1-12 07:10 PM 編輯 [/i]]

ady.keung 2013-1-13 03:41 AM

[quote]原帖由 [i]sherry0052[/i] 於 2013-1-12 07:08 PM 發表 [url=http://www.discuss.com.hk/redirect.php?goto=findpost&pid=351610571&ptid=21290414][img]http://www.discuss.com.hk/images/common/back.gif[/img][/url]
但唔轉番英文的話,點打英文?:smile_41: [/quote]你跟16帖做完後鍵盤打唔到英文?我冇依個問題,只糸有幾個繁體軟件變左怪字

[[i] 本帖最後由 ady.keung 於 2013-1-13 03:46 AM 編輯 [/i]]

sherry0052 2013-1-13 01:49 PM

回覆 29# 的帖子

係,搞黎搞去都搞唔惦,放棄!
頁: [1] 2
查看完整版本: 手寫板