查看完整版本 : 專門店

puggylau 2019-3-20 11:49 AM

專門店

我想喺條原裝膠錶帶上打多個窿,去到專門店話無呢個服務,感覺好似差咗少少

wing0605 2019-3-20 01:02 PM

我都問過他們沒有打㝫服務的!

puggylau 2019-3-20 01:03 PM

比較失望

hellokittysucks 2019-3-30 02:47 PM

[quote]原帖由 [i]puggylau[/i] 於 2019-3-20 11:49 AM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=496510140&ptid=28105082][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]
我想喺條原裝膠錶帶上打多個窿,去到專門店話無呢個服務,感覺好似差咗少少 [/quote]
Most the straps are tapered and upper section is padded heavily. Adding one extra hole or two will cut into the padding as well as scraping the pin buckle agains the edge. Not to mention the pin buckle would be sitting off to 6 o’clock.

They offer S and XS size for most OEM choice, plus there’s endless aftermarket and custom choice.

Don’t buy a luxury watch and cheap out on the straps please.

carvenyan 2019-3-31 01:13 AM

[quote]原帖由 [i]puggylau[/i] 於 2019-3-20 11:49 AM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=496510140&ptid=28105082][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]
我想喺條原裝膠錶帶上打多個窿,去到專門店話無呢個服務,感覺好似差咗少少 [/quote]
橡膠帶不能打窿!
第一條橡膠帶係斜帶,上半部會比較厚身及闊,就算打咗窿都穿唔入!
原裝窿係倒模出嚟,冇缺口,好耐用,但打窿槍切口太利,好容易崩之後就會爛開!
講真,打完其實都唔靚,不如定條加長帶或者短帶,帶得咁靚嘅錶,唔好慳少少啦😓

dwtm 2019-4-1 08:42 PM

我跟錶出的原装膠带出现裂紋, 不知應否再訂一條原装, 还是買街版, 师兄们有没意見

hellokittysucks 2019-4-6 10:33 PM

[quote]原帖由 [i]dwtm[/i] 於 2019-4-1 08:42 PM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=497128480&ptid=28105082][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]
我跟錶出的原装膠带出现裂紋, 不知應否再訂一條原装, 还是買街版, 师兄们有没意見 [/quote]
RubberB and OEM costs about the same. You might want to check that out before it totally breaks off
頁: [1]
查看完整版本: 專門店