查看完整版本 : Linksys Velop setting 求救

geccn 2019-11-2 07:41 AM

Linksys Velop setting 求救

昨天買了Velop Dual Band,上網見人Set搵到部機就可以set wifi名稱密碼,但我自己的就要求入isp,但選項又冇DCPH,而我屋企用DCPH,請問有冇大大識搞可以幫幫忙?:smile_27:

[[i] 本帖最後由 geccn 於 2019-11-2 07:42 AM 編輯 [/i]]

PnPnL 2019-11-2 01:02 PM

[quote]原帖由 [i]geccn[/i] 於 2019-11-2 07:41 AM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=509376601&ptid=28648527][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]
昨天買了Velop Dual Band,上網見人Set搵到部機就可以set wifi名稱密碼,但我自己的就要求入isp,但選項又冇DCPH,而我屋企用DCPH,請問有冇大大識搞可以幫幫忙?:smile_27: ... [/quote]


直接call Linksys TS

geccn 2019-11-2 01:13 PM

[quote]原帖由 [i]PnPnL[/i] 於 2019-11-2 01:02 PM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=509388627&ptid=28648527][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]



直接call Linksys TS [/quote]
:smile_35:當然,只係要辦公時間先可以call,要星期四放假先可以,所以心急想知有冇大大遇過相同情況,可以早點解決⋯

PnPnL 2019-11-2 01:54 PM

[quote]原帖由 [i]geccn[/i] 於 2019-11-2 01:13 PM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=509389105&ptid=28648527][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]

:smile_35:當然,只係要辦公時間先可以call,要星期四放假先可以,所以心急想知有冇大大遇過相同情況,可以早點解決⋯ [/quote]


dynamic=DHCP

SOMA1963 2019-11-2 02:58 PM

[quote]原帖由 [i]geccn[/i] 於 2019-11-2 07:41 AM 發表 [url=https://computer.discuss.com.hk/redirect.php?goto=findpost&pid=509376601&ptid=28648527][img]https://computer.discuss.com.hk/images/common/back.gif[/img][/url]
昨天買了Velop Dual Band,上網見人Set搵到部機就可以set wifi名稱密碼,但我自己的就要求入isp,但選項又冇DCPH,而我屋企用DCPH,請問有冇大大識搞可以幫幫忙?:smile_27: ... [/quote]
第一, velop 係唔係插你個寛頻供應商比你條綫,

    如果係, 有D供應商要輸入帳戶同密碼先可以上網, 呢個係冇得set dhcp.

    如果唔係, 係插你個原來個router 嘅lan port 1-4 是但一個, [color=Green]你係用dhcp, 其個係你個內網用dhcp[/color] , velop 應該會自己攪dhcp.

[[i] 本帖最後由 SOMA1963 於 2019-11-2 03:06 PM 編輯 [/i]]

geccn 2019-11-2 03:04 PM

[quote]原帖由 [i]SOMA1963[/i] 於 2019-11-2 02:58 PM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=509393440&ptid=28648527][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]

第一, velop 係唔係插你個寛頻供應商比你條綫,

    如果係, 有D供應商要輸入帳戶同密碼先可以上網, 呢個係冇得set dhcp.

    如果唔係, 係插你個原來個router 嘅lan port 1-4 是但一個, 你係用dhcp, 其個係你個內網用dhcp , 原來個router就有, 所你要關閉velop 上面個dhcp, 唔關嘅話, 連到velop 都可能上 ... [/quote]
我係插寬頻供應商嘅解碼器⋯咁即係要關velop嘅DHCP?:smile_35:

[[i] 本帖最後由 geccn 於 2019-11-2 03:27 PM 編輯 [/i]]

SOMA1963 2019-11-2 05:29 PM

[quote]原帖由 [i]geccn[/i] 於 2019-11-2 03:04 PM 發表 [url=https://computer.discuss.com.hk/redirect.php?goto=findpost&pid=509393673&ptid=28648527][img]https://computer.discuss.com.hk/images/common/back.gif[/img][/url]

我係插寬頻供應商嘅解碼器⋯咁即係要關velop嘅DHCP?:smile_35: [/quote]
  isp 個密碼同帳號係連綫上網需要, 同dhcp 係兩樣野, dhcp係手機枱機 同 router之間上網設定, 一般預設就係dhcp, wifi你只要設定名同密稱就可以.

如果解碼器同velop中間無router, 即velop 就係當router, 就唔使關velop 個dhcp.

[[i] 本帖最後由 SOMA1963 於 2019-11-2 06:42 PM 編輯 [/i]]

geccn 2019-11-2 05:52 PM

[quote]原帖由 [i]SOMA1963[/i] 於 2019-11-2 05:29 PM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=509399482&ptid=28648527][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]

  isp 個密碼同帳號係連綫上網需要, 同dhcp 係兩樣野, dhcp係手機枱機上網設定, 一般預設就係dhcp, wifi你只要設定名同密稱就可以.

如果解碼器同velop中間無router, 即velop 就係當router, 就唔使關velop 個dhcp. ... [/quote]
但Velop俾我入嘅只係問網絡商攞isp名稱及密碼,或是「不是Pppoe」兩項選擇,選前者要問網絡商,但網絡商說他提供的是DHCP,選後者,只有靜態iP,Pppoe及Vlan上的Pppoe3個選擇,冇動態ip(DHCP)的選擇,所以依家老鼠拉龜⋯:'):'):')

SOMA1963 2019-11-2 06:57 PM

[quote]原帖由 [i]geccn[/i] 於 2019-11-2 05:52 PM 發表 [url=https://computer.discuss.com.hk/redirect.php?goto=findpost&pid=509400356&ptid=28648527][img]https://computer.discuss.com.hk/images/common/back.gif[/img][/url]

但Velop俾我入嘅只係問網絡商攞isp名稱及密碼,或是「不是Pppoe」兩項選擇,選前者要問網絡商,但網絡商說他提供的是DHCP,選後者,只有靜態iP,Pppoe及Vlan上的Pppoe3個選擇,冇動態ip(DHCP)的選擇,所以依家老鼠拉龜⋯:'):'):') ... [/quote]
velop 有apps 做設定, 上面選internet setting 有 automatic 選.

SOMA1963 2019-11-2 07:10 PM

[quote]原帖由 [i]SOMA1963[/i] 於 2019-11-2 06:57 PM 發表 [url=https://computer.discuss.com.hk/redirect.php?goto=findpost&pid=509403305&ptid=28648527][img]https://computer.discuss.com.hk/images/common/back.gif[/img][/url]

velop 有apps 做設定, 上面選internet setting 有 automatic 選. [/quote]
[b]Internet connection setup[/b]

If you are having issues setting up the internet connection, follow the steps below to know how to configure a node using the Velop’s web interface.
[b]Step 1: [/b]
Open a browser and enter “[url=http://myrouter.local/]http://myrouter.local/[/url]” in the Address bar, then press [b][Enter][/b].

[b]Step 2: [/b]
You will be redirected to [b]http://linksyssmartwifi.com:52000/ui/dynamic/velop/desktop-blocking.html[/b].

[b]Step 3: [/b]
Click on the [b]VELOP[/b] logo.

[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-006_EN_v5.png[/img]

Then, wait for the page to load.

[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-007_EN_v5.png[/img]

[b]Step 4: [/b]
Enter “admin” in the field, then click [b]Sign In[/b].

[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-008_EN_v5.png[/img]

[b]Step 5: [/b]
Click on the [b]CA[/b] link at the bottom-right corner of the screen.

[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-009_EN_v5.png[/img]

[b]Step 6: [/b]
Once you are taken to the dashboard, click [b]Connectivity [/b]>[b] Internet Settings[/b] and configure this section according to your internet connection type.  Click on [b]Apply[/b], then click on [b]Ok[/b] to save changes.

[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-010_EN_v5.png[/img]

[b]Step 7: [/b]
Go to [b]Connectivity[/b] > [b]Velop Setup[/b] and set the SSID and Password of your Velop network.  Then, click the [b]Setup Node[/b] button to proceed.

[b]NOTES:  [/b]Clicking on the [b]Setup Node[/b] button will configure the simple Wi-Fi settings and will also:
[list][*]        Set the node's mode to [b]Master[/b][*]        Set the administrator password to [b]admin[/b][*]        Set the node's name / location to [b]Node1[/b][/list]
[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-011_EN_v5.png[/img]

[b]Step 8:[/b]
Click [b]Ok[/b] then check your computer’s Wi-Fi connection.  Once the Wi-Fi settings have been saved on the node, you will need to connect to the new SSID of your Velop network to continue.

[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-012_EN_v5.png[/img]

[b]Step 9:[/b]
Once Step 8 is completed, your primary node should now be configured.  To add secondary nodes, place them near the primary node.  Turn ON the other nodes and wait until the light on each node turns [b]solid purple[/b] before you click the [b]Add Wireless Child Nodes[/b] button.

[b]NOTE:[/b]  If you set up wired nodes, connect an ethernet cable from your secondary node to the primary node; wait until your node's light turns solid purple and then click on [b]Add Wired Child Nodes[/b].

[img]http://s3.amazonaws.com/downloads.linksys.com/support/assets/image/263802/SF263802-013_EN_v5.png[/img]

geccn 2019-11-2 07:55 PM

[quote]原帖由 [i]SOMA1963[/i] 於 2019-11-2 06:57 PM 發表 [url=https://www.discuss.com.hk/redirect.php?goto=findpost&pid=509403305&ptid=28648527][img]https://www.discuss.com.hk/images/common/back.gif[/img][/url]

velop 有apps 做設定, 上面選internet setting 有 automatic 選. [/quote]
很感謝大大你的答覆,但[attach]10456827[/attach]
[attach]10456828[/attach]
我的apps只有登入,及登入後裝機的選擇,可惜係裝機每次都出現ISP呢幕,根本冇法成功set機,所以亦睇唔到internet setting呢個選項⋯:')

SOMA1963 2019-11-2 08:25 PM

[quote]原帖由 [i]geccn[/i] 於 2019-11-2 07:55 PM 發表 [url=https://computer.discuss.com.hk/redirect.php?goto=findpost&pid=509405617&ptid=28648527][img]https://computer.discuss.com.hk/images/common/back.gif[/img][/url]

很感謝大大你的答覆,但10456827
10456828
我的apps只有登入,及登入後裝機的選擇,可惜係裝機每次都出現ISP呢幕,根本冇法成功set機,所以亦睇唔到internet setting呢個選項⋯:') ... [/quote]
你試搵一件reset to factory default(另一件熄機), 然係插入isp 個解碼器, 再入apps 試.

SOMA1963 2019-11-2 08:37 PM

[quote]原帖由 [i]SOMA1963[/i] 於 2019-11-2 08:25 PM 發表 [url=https://computer.discuss.com.hk/redirect.php?goto=findpost&pid=509406742&ptid=28648527][img]https://computer.discuss.com.hk/images/common/back.gif[/img][/url]

你試搵一件reset to factory default(另一件熄機), 然係插入isp 個解碼器, 再入apps 試. [/quote]

reset to factory default, 於著機時按機底reset 制約7秒, 直到指示燈轉紅至熄後再亮紅燈.

To reset Velop: •With your node connected to power and turned on, press and hold the Reset button on the bottom. The light on top of the node will turn red and fade in pulses. Do not release the button until the light goes out and then turns bright re
頁: [1]
查看完整版本: Linksys Velop setting 求救